Quality Repairing or maintenance service and professional installation
0564433997

Damascus road, Al Qusais, Industrial Area 3, Dubai, UAE

042997332
|
24/7 Service
Follow us
Top

6 STAGE RO SYSTEM WITH STAND 3 & UV1GPM

ITEM CODE:   AP-600W-UV1-GST3

DESCRIPTION

  • 6 STAGE RO SYSTEM WITH STAND 3 & UV1GPM
  • 3STAGE PREFILTERS
  • 75GPD MEMBRANE
  • INLINE GAC FILTER
  • ANTI-SCANLENT FILTER
  • UV1GPM & CE BALLAST
  • PRESSURE GAUGE
  • FCCRM FAUCET
  • 3.6 GAL. TANK
  • INSTALLATION KIT

Power: 220V/50HZ

Mani Parts List:

  • AEG-10 Filter Housings
  • FL-PPS-10 NSF 5u Sediment Filter
  • Pressure Gauge
  • UPF COCONUT SHELL GAC Filter
  • 24V Booster Pump + Transformer
  • APC-10 Carbon Block Filter
  • UV1GPM + CE Ballast
  • 75 GPD RO MEMBRANE
  • HIGH & LOW PRESSURE SWITCH
  • AIC-2 NSF INLINE GAC Filter
  • FCCRM NSF FAUCET
  • Anti Scalent INLINE Filter
  • 3.6GAL. NSF PRESSURE TANK

PRODUCT SPECIFICATION

AQUAPRO UV STERILIZER UV-1GPM

Full SS304 UV chamber with overlapped welding process USA 14w UV lamp 12000hours life, and genuine quartz sleeve CE certified ballast & UK plug

Each unit tested with 60PSI / 4KGS

MAIN PARTS :

UV CHAMBER -SS304 IN/OUT THREAD-SS304 1/4”

UV-1L 14W T5L USA CE LAMP UV-1Q QUARTZ GLASS SLEEVE

UV-OR SILICON (up to 120 degree) UV END CAP ALUMINUM

BA-1014W CE BALLAT 10-14W

First time operation

  • Plug in the power Allow several minutes for the system to flush and fill.
  • Do not drink the first tank of About one to two hours after the system started, turn on the faucet and drain completely the first tank of water.

When abnormal conditions occur

  • Shut off the system

Unplug power supply first, then turn off feed water adapter valve

  • Call authorized service center or Before calling, please try your best to determine exactly the problem you have encountered by referring to the “Troubleshooting” section.

Away from home

  • If you know you are not using the system for more than two weeks, shut off the system and drain the stored
  • Turn off feed water adapter

Restarting the system

  • Turn on the feed water adapter
  • Plug in the power

Changing the filter cartridges

If you are not familiar with the appliance, please call your local service center or distributor for servicing.

  • Follow the proper procedure to shut off the
  • Use a housing wrench to open the Make sure the Appliance always stands upright during filter changes.
  • Replace the correct cartridge, and tape the thread with Teflon Make sure the flow direction before

changing filter.

PRODUCT INSTALLATION

Different installation method is used depending on the type of water supply piping arrangement in your home.

  • Undersink supply piping arrangement
  • Turn off cold water valve or the main
  • Loosen nut at the top of
  • Install the feed water adapter
  • Reconnect the nut with cone washers to the feed water
  • Connect 1/4″ (or 3/8″) tubing to the feed water adapter valve, using compression nut, plastic sleeve and

Wall mount mixer or faucet(option)

  • Turn off water main valve. Remove the
  • Install feed water adapter valve on the cold water side
  • Install the extension piece on the hot water

Reinstall the faucet.

Get Quote






    X
    Get Quote Now